Integration of Fringe Projection and 2D Digital Image Correlation for the measurement of 3D displacements and strains
L. Felipe- Sesé, F. A. Díaz, P. Siegmann
Download Paper
Base Information
Volume
V50 - N1 / 2017 Ordinario
Reference
25-35
DOI
http://doi.org/10.7149/OPA.50.1.49505
Language
Spanish
Keywords
Digital Image Correlation, Fringe Projection, Experimental Mechanics, 3D Strain measurement
Abstract
In many engineering applications, the measurement of displacements maps in all three spatial directions over the surface of a loaded object is often required, such an example is, structural testing or manufacturing quality control. At present, for this proposes, typically 3-dimensional digital image correlation (3D-DIC) is often used. This technique employs two cameras acquiring images from different viewing angles of the object while it is deformed. The cameras have to be perfectly synchronized and calibrated for both: 3D reconstruction and for tracking each surface element while the deformation occurs. The calibration process of the technique requires acquiring a sequence of several images of a calibration object and a high amount of computational resources. Alternative techniques have been proposed to obtain 3D displacement maps by combining Fringe Projection (FP) with two-dimensional DIC (2D-DIC). The hybrid technique only requires one camera and a fringe projector. In this thesis it is presented a novel device that allows obtaining the maps of displacements in X-, Y- and Z- direction at the surface of an object during deformation. The system is based on a method that combines 2D-DIC and FP to obtain the in- and out-of-plane components of displacement during deformation. The device operates by acquiring only one image of the studied object at each deformation state desired to analyze during the total test, thereby allowing real time data acquisition. The goal of the presented work is that the device allows both: a precise perpendicular alignment respect to a flat reference surface, and a self-calibration (i.e. no calibration object is employed). Thus, a fringe calibration constant is estimated for each pixel as well as all the required parameters for the in-plane displacement correction. To illustrate the potential of the proposed device, a set of static and dynamic experiments have been conducted using hyperelastic materials. The maximum out-of-plane displacement achieved was 20 mm with an uncertainty of 0,023 mm and an in-plane displacement uncertainty of 0,0083 mm. Results have been compared with those obtained using a commercial three dimensional digital image correlation system showing a very high level of agreement.
References
Felipe Sesé. "Integration of Fringe Projection and 2D Digital Image Correlation for the measurement of 3D displacements and strains". Universidad de Jaén. (2010) Tesis
Sutton, M., Orteu, J. & Schreier, H. W., "Image Correlation for Shape, Motion and Deformation Measurements". New York: Springer Science+Business Media. (2009)
Pan, B., Xie, H., Guo,, Z. & Hua, T., "Full-field strain measurement using a two-dimensional Savitzky-Golay digital differentiator in digital image correlation." Opt. Eng., 46, p. 033601(2007) DOI
Takeda, M. & Mutoh, K., "Fourier transform profilometry for the automatic measurement of 3-D object shapes." Appl. Opt., 22 3977-3982 (1983) DOI
Tay, C., Quan, C., Wu, T. & Huang, Y., "Integrated method for 3-D rigid-body displacement measurement using fringe projection." Opt. Eng., 43, 1152-1159.(2004) DOI
Siegmann, P., Álvarez-Fernández, V., Díaz-Garrido, F. & Patterson, E., "A simultaneous in- and out-ofplane displacement measurement method." Opt. Lett., 36, 10-12. (2011) DOI
Barrientos, B., Cerca, M., García-Marquez, C. & Hernández-Bernal, C., "Three-dimensional displacement fields measured in a deforming granular-media surface by combined fringe projection ad speckle photography." J. Opt. A-Pure Appl. Op,. 10: 104027 (2008) DOI
Mares, C., Barrientos, B. & Blanco, A., "Measurement of transient deformation by color encoding." Opt. Express, 19, 25712-25722. (2011) DOI
Bing Pan, Kemao Qian, Huimin Xie and Anand Asundi "Two-dimensional digital image correlation for in-plane displacement and strain measurement: A review." Meas. Sci. Technol. 20 062001(2009) DOI
Heredia Ortiz, M. E. "Novel developments of moire techniques for industrial applications." Sheffield: University of Sheffield. (2004)
Ghiglia, D. & Pritt, M. "Two-Dimensional Phase Unwrapping: Theory, Algorithms, and Software." New York: Wiley&Blackwell. (1998)
Felipe-Sesé, L., Siegmann, P., Díaz, F. & Patterson, E. "Simultaneous in-and-out of-plane displacement measurements using fringe projection and digital image correlation." Opt. Laser Eng., 2, 66–74.(2014) DOI
Felipe-Sesé, L., Siegmann, P., Díaz-Garrido, F. & Patterson, E. "Integrating fringe projection and digital image correlation for high quality measurements of shape changes." Opt. Eng. 53:044106 (2014) DOI